Portrait of Dr Fengshou Gu Dr Fengshou Gu

View research degree topics that Dr Fengshou Gu might supervise

f.gu@hud.ac.uk | 01484 472965


  0000-0003-4907-525X  


Biography

Fengshou Gu is one of our experts in the fields of vibro-acoustics analysis and machinery diagnosis, with over 20 years of research experience. He is the author of over 100 technical and professional publications in machine dynamics, signal processing, condition monitoring and related fields. He has been involved in vibro-acoustics related to internal combustion engines, reciprocating compressors, centrifugal pumps, electric motors, hydraulic power systems, gearboxes and bearings. He has experience in system modeling, various physical parameter measurements, and advanced signal processing techniques including time-frequency analysis, wavelet transforms, neural network algorithms and statistical analysis.

Research and Scholarship

Research work undertaken

  • Large volume diesel engine diagnostics
  • Marine propulsion system monitoring
  • Structure integrity assessment

Research subjects

  • Vibro-impact modelling;
  • Machine modelling and fault simulation;
  • Neural network modelling;
  • Time-frequency and time-scale analysis;
  • Modulation and demodulation analysis;
  • Complex vibro-acoustic source identification;
  • Acoustic condition monitoring;
  • Intelligent monitoring system;
  • Powerless and wireless data sensing and transfer

Publications and Other Research Outputs

2018

Tian, X., Xi Gu, J., Rehab, I., Abdalla, G., Gu, F. and Ball, A. (2018) ‘A robust detector for rolling element bearing condition monitoring based on the modulation signal bispectrum and its performance evaluation against the KurtogramMechanical Systems and Signal Processing , 100, pp. 167-187. ISSN 0888-3270

Lu, K., Lian, Z., Gu, F. and Liu, H. (2018) ‘Model-based Chatter Stability Prediction and Detection for the Turning of a Flexible WorkpieceMechanical Systems and Signal Processing , 100, pp. 814-826. ISSN 0888-3270

2017

Brethee, K., Zhen, D., Gu, F. and Ball, A. (2017) ‘Helical gear wear monitoring: Modelling and experimental validationMechanism and Machine Theory , 117, pp. 210-229. ISSN 0094-114X

Feng, G., Zhao, H., Gu, F., Needham, P. and Ball, A. (2017) ‘Efficient implementation of envelope analysis on resources limited wireless sensor nodes for accurate bearing fault diagnosisMeasurement , 110, pp. 307-318. ISSN 0263-2241

Xu, Y., Haiyang, L., Zhen, D., Rehab, I., Gu, F. and Ball, A. (2017) ‘Fault Detection of Rolling Bearings Using an Ensemble Average Autocorrelation Based Stochastic Subspace Identification’. In: 24th international congress on sound and vibration, 23rd-27th July 2017, London

Li, G., Gu, F., Wang, T., You, J. and Ball, A. (2017) ‘Investigation into the Vibrational Responses of Cylinder Liners in an IC Engine Fueled with BiodieselApplied Sciences , 7 (7), p. 717. ISSN 2076-3417

Qin, G., Gu, F., Xu, Y., Liu, F. and Ball, A. (2017) ‘Bogie Speed Estimation and Signal Source Separation via Rail Vibration Analysis’. In: COMADEM 2017: 30th International Congress & Exhibition on Condition Monitoring and Diagnostic Engineering Management, Monday 10th - Thursday 13th July 2017, University of Central Lancashire, Preston

van Vuuren, P., Xu, Y., Gu, F. and Ball, A. (2017) ‘Monitoring gearbox oil viscosity by means of motor current signal analysis’. In: First World Congress on Condition Monitoring - WCCM 2017, 13th-16th June 2017, ILEC Conference Centre, London

Ogbulafor, U., Feng, G., Mones, Z., Gu, F. and Ball, A. (2017) ‘Application of Wavelet Packet Transform and Envelope Analysis to Non-stationary Vibration Signals For Fault Diagnosis of a Reciprocating Compressor’. In: First World Congress on Condition Monitoring - WCCM 2017, 13th-16th June 2017, ILEC Conference Centre, London

Shaeboub, A., Gu, F., Lane, M., Haba, U., Wu, Z. and Ball, A. (2017) ‘Modulation signal bispectrum analysis of electric signals for the detection and diagnosis of compound faults in induction motors with sensorless drivesSystems Science & Control Engineering , 5 (1), pp. 252-267. ISSN 2164-2583

Sun, H., Wang, J., Longstaff, A. and Gu, F. (2017) ‘Characterizing acoustic emission signals for the online monitoring of a fluid magnetic abrasives finishing processProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science . ISSN 0954-4062

Zhang, R., Gu, X., Gu, F., Wang, T. and Ball, A. (2017) ‘Gear wear process monitoring using a sideband estimator based on modulation signal bispectrumApplied Sciences , 7 (3), p. 274. ISSN 2076-3417

Zhang, R., Gu, F., Mansaf, H., Wang, T. and Ball, A. (2017) ‘Gear wear monitoring by modulation signal bispectrum based on motor current signal analysisMechanical Systems and Signal Processing , 94, pp. 202-213. ISSN 08883270

Li, G., Gu, F., Wang, T., Yang, T. and Ball, A. (2017) ‘Investigation into the dynamic response of cylinder liners in an IC engine based on a validated finite-element modelSystems Science & Control Engineering , 5 (1), pp. 56-69. ISSN 2164-2583

Brethee, K., Gu, F. and Ball, A. (2017) ‘Monitoring of Water Contamination in Gearbox Lubricant Based on Vibration Analysis’. In: COMADEM 2017, 10-13 July 2017, University of Central Lancaster, UK

Habu, U., Brethee, K., Hassin, O., Gu, F. and Ball, A. (2017) ‘Detection and Diagnosis of Reciprocating Compressor Faults Based on Modulation Signal Bispectrum Analysis of Vibrations’. In: COMADEM 2017, 10-13 July 2017, University of Central Lancaster, UK

2016

Liu, F., Gu, F., Zhao, Y. and Ball, A. (2016) ‘A validation study of ACS-SSI for online condition monitoring of vehicle suspension systemsVibroengineering Procedia , 10, pp. 369-375. ISSN 2345-0533

Mones, Z., Feng, G., Ogbulaor, U., Wang, T., Gu, F. and Ball, A. (2016) ‘Performance evaluation of wireless MEMS accelerometer for reciprocating compressor condition monitoring’. In: Power Engineering: Proceedings of the International Conference on Power Transmissions. Chongqing, P.R. China: Taylor & Francis. pp. 893-900. ISBN 978-1-138-03267-5

Hassin, O., Yao, A., Gu, F. and Ball, A. (2016) ‘Journal bearing condition monitoring based on the modulation signal bispectrum analysis of vibrations’. In: Proceedings of the International Conference on Power Transmissions 2016 (ICPT 2016). : Taylor & Francis. pp. 907-912. ISBN 9781138032675

Lane, M., Shaeboub, A., Gu, F. and Ball, A. (2016) ‘Investigation of Reductions in Motor Efficiency caused by Stator Faults when operated from an Inverter Drive’. In: Proceedings 22nd International Conference on Automation and Computing (ICAC). : IEEE. . ISBN 9781862181328

Shaeboub, A., Lane, M., Haba, U., Gu, F. and Ball, A. (2016) ‘Detection and Diagnosis of Compound Faults in Induction Motors Using Electric Signals from Variable Speed Drives’. In: Proceedings 22nd International Conference on Automation and Computing (ICAC). : IEEE. . ISBN 9781862181328

Li, G., Gu, F., Wei, N., Xu, Y. and Ball, A. (2016) ‘A validated finite element model for predicting dynamic responses of cylinder liners in an IC engine*’. In: Proceedings 22nd International Conference on Automation and Computing (ICAC). : IEEE. . ISBN 9781862181328

Hamad, N., Brethee, K., Gu, F. and Ball, A. (2016) ‘An Investigation of Electrical Motor Parameters in a Sensorless Variable Speed Drive for Machine Fault Diagnosis’. In: Proceedings 22nd International Conference on Automation and Computing (ICAC). : IEEE. . ISBN 9781862181328

Madamedon, M., Gu, F., Aburass, A. and Ball, A. (2016) ‘Online Estimation of Engine Driveline Dynamic Properties’. In: International Conference for Student on Applied engineering, 20-21st October 2016, Newcastle

Brethee, K., Gu, F. and Ball, A. (2016) ‘Frictional effects on the dynamic responses of gear systems and the diagnostics of tooth breakagesSystems Science & Control Engineering , 4 (1), pp. 270-284. ISSN 2164-2583

Smith, A., Gu, F. and Ball, A. (2016) ‘Maintaining model efficiency, avoiding bias and reducing input parameter volume in compressor fault classification’. In: 2016 7th International Conference on Mechanical and Aerospace Engineering (ICMAE). : IEEE. pp. 196-201. ISBN 978-1467388290

Rehab, I., Tiana, X., Hu, N., Yan, T., Zhang, R., Gu, F. and Ball, A. (2016) ‘A study of two bispectral features from envelope signals for bearing fault diagnosis’. In: IncoME 2016, 30th - 31st August 2016, Manchester Conference Centre, Manchester

Brethee, K., Zhou, X., Gu, F. and Ball, A. (2016) ‘Frictional Effects on the Diagnostics of Helical Gear Tooth Defects’. In: IncoME 2016, 30th - 31st August 2016, Manchester Conference Centre, Manchester

Brethee, K., Zhang, R., Hamad, N., Gu, F. and Ball, A. (2016) ‘Influence of Lubricant Starvation on Gearbox Vibration Signatures for Condition Monitoring’. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China

Ball, A., Wang, T., Tian, X. and Gu, F. (2016) ‘A robust detector for rolling element bearing condition monitoring based on the modulation signal bispectrum,’. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China

Rehab, I., Tian, X., Zhang, R., Gu, F. and Ball, A. (2016) ‘A Study Of The Diagnostic Amplitude Of Rolling Bearing Under Increasing Radial Clearance Using Modulation Signal Bispectrum’. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China

Elforjani, B., Feng, G., Gu, F. and Ball, A. (2016) ‘Energy Harvesting Based Wireless Sensor Nodes for The Monitoring Temperature of Gearbox’. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China

Hassin, O., Yao, A., Wei, N., Gu, F. and Ball, A. (2016) ‘Monitoring Oil Levels Of Journal Bearings Based On The Analysis Of Vibration Signals’. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China

Haba, U., Feng, G., Shaeboub, A., Peng, X., Gu, F. and Ball, A. (2016) ‘Detection and Diagnosis of Compound Faults in a Reciprocating Compressor based on Motor Current Signatures’. In: COMADEM 2016, the 29th International Congress on Condition Monitoring and Diagnostic Engineering Management, 20th-22nd August 2016, Empark Grand Hotel in Xi’an, China

Wang, R., Gu, F., Cattley, R. and Ball, A. (2016) ‘Modelling, Testing and Analysis of a Regenerative Hydraulic Shock Absorber SystemEnergies , 9 (5). ISSN 1996-1073

Wang, R., Gao, J., Gu, F. and Ball, A. (2016) ‘Research on effect of gas-charged accumulator capacity on hydraulic regenerative shock absorber system’. In: Energy and Mechanical Engineering: Proceedings of 2015 International Conference on Energy and Mechanical Engineering. : World Scientific. pp. 765-774. ISBN 9789814749510

Zhang, X., He, X., Xing, B., Zhao, L., Lu, Y., Gu, F. and Ball, A. (2016) ‘Influence of heat treatment on fatigue performances for self-piercing riveting similar and dissimilar titanium, aluminium and copper alloysMaterials & Design , 97, pp. 108-117. ISSN 0264-1275

Feng, G., Hu, N., Mones, Z., Gu, F. and Ball, A. (2016) ‘An investigation of the orthogonal outputs from an on-rotor MEMS accelerometer for reciprocating compressor condition monitoringMechanical Systems and Signal Processing , 76-77, pp. 228-241. ISSN 0888-3270

2015

Tian, X., Gu, F., Rehab, I., Abdalla, G. and Ball, A. (2015) ‘A robust fault detection method of rolling bearings using modulation signal bispectrum analysis’. In: 28th International Congress of Condition Monitoring and Diagnostic Engineering Management (COMADEM 2015), 1st - 4th December 2015, Buenos Aires, Argentina

Hassin, O., Wei, N., Towsyfyan, H., Gu, F. and Ball, A. (2015) ‘Journal bearing lubrication monitoring based on spectrum cluster analysis of vibration signals’. In: 28th International Congress of Condition Monitoring and Diagnostic Engineering Management (COMADEM 2015), 1st - 4th December 2015, Buenos Aires, Argentina

Abusaad, S., Gu, F., Zhang, R. and Ball, A. (2015) ‘Observer-based Fault Detection and Diagnosis for Mechanical Transmission Systems with Sensorless Variable Speed Drives’. In: 28th International Congress of Condition Monitoring and Diagnostic Engineering Management (COMADEM 2015), 1st - 4th December 2015, Buenos Aires, Argentina

Yang, D., Gu, F., Feng, G., Yang, Y. and Ball, A. (2015) ‘Achieving high bit rate logical stochastic resonance in a bistable system by adjusting parametersChinese Physics B , 24 (11), p. 110502. ISSN 1674-1056

Li, G., Wang, T., Zhang, R., Gu, F. and Shen, J. (2015) ‘An Improved Optimal Slip Ratio Prediction considering Tyre Inflation Pressure ChangesJournal of Control Science and Engineering , 2015, pp. 1-8. ISSN 1687-5249

Smith, A., Gu, F. and Ball, A. (2015) ‘"Selection of Input Parameters for Multivariate Classifiersin Proactive Machine Health Monitoring by Clustering Envelope Spectrum Harmonics"Applied Mechanics and Materials , 798, pp. 308-313. ISSN 1662-7482

Brethee, K., Gao, J., Ball, A. and Gu, F. (2015) ‘Analysis of Frictional Effects on the Dynamic Response of Gear Systems and the Implications for Diagnostics’. In: Proceedings of the 21st International Conference on Automation and Computing (ICAC). : IEEE. . ISBN 978-0-9926801-0-7

Lane, M., Ashari, D., Ball, A. and Gu, F. (2015) ‘Investigation of Motor Supply Signature Analysis to Detect Motor Resistance Imbalances’. In: Proceedings of the 21st International Conference on Automation and Computing (ICAC). : IEEE. . ISBN 978-0-9926801-0-7

Tian, X., Abdallaa, G., Rehab, I., Gu, F. and Ball, A. (2015) ‘Diagnosis of Combination Faults in a Planetary Gearbox using a Modulation Signal Bispectrum based Sideband Estimator’. In: Proceedings of the 21st International Conference on Automation and Computing (ICAC). : IEEE. . ISBN 978-0-9926801-0-7

Shaeboub, A., Abusaad, S., Hu, N., Gu, F. and Ball, A. (2015) ‘Detection and Diagnosis of Motor Stator Faults using Electric Signals from Variable Speed Drives’. In: Proceedings of the 21st International Conference on Automation and Computing (ICAC). : IEEE. . ISBN 978-0-9926801-0-7

Towsyfyan, H., Wei, N., Gu, F. and Ball, A. (2015) ‘Identification of lubrication Regimes in Mechanical Seals using Acoustic Emission for Condition Monitoring’. In: The 54th Annual Conference ofThe British Institute of Non-Destructive Testing BINDT 2015, 8th - 10th September 2015, Telford, UK

Rehab, I., Tian, X., Ball, A. and Gu, F. (2015) ‘A Study of Diagnostic Signatures of a Deep Groove Ball Bearing Based on a Nonlinear Dynamic Mode’. In: Proceedings of the 21st International Conference on Automation and Computing (ICAC). : IEEE. . ISBN 978-0-9926801-0-7

Wei, N., Gu, F., Wang, T., Li, G., Xu, Y., Yang, L. and Ball, A. (2015) ‘Characterisation of Acoustic Emissions for the Frictional Effect in Engines using Wavelets based Multi-resolution Analysis’. In: Proceedings of the 21st International Conference on Automation and Computing (ICAC). : IEEE. . ISBN 978-0-9926801-0-7

Zhen, D., Shi, Z., Song, Z., Gu, F. and Ball, A. (2015) ‘Combustion Noise Analysis for Combustion and Fuels Diagnosis of a CI Diesel Engine Operating with BiodieselsCombustion Science and Technology , p. 150707092649006. ISSN 0010-2202

Chen, Z., Wang, T., Gu, F. and Jing, P. (2015) ‘Characterizing the Dynamic Response of a Chassis Frame in a Heavy-Duty Dump Vehicle based on an Improved Stochastic System IdentificationShock and Vibration . ISSN 1875-9203

Smith, A., Gu, F. and Ball, A. (2015) ‘Selection of Input Parameters for Multivariate Classifiers in Proactive Machine Health Monitoring by Clustering Envelope Spectrum Harmonics’. In: 6th International Conference on Mechanical and Aerospace Engineering, 16th - 17th July 2015, Rome, Italy

Abusaad, S., Brethee, K., Assaeh, M., Zhang, R., Gu, F. and Ball, A. (2015) ‘The detection of lubricating oil viscosity changes in gearbox transmission systems driven by sensorless variable speed drives using electrical supply parametersJournal of Physics: Conference Series , 628, p. 012078. ISSN 1742-6588

Chen, Z., Wang, T., Gu, F., Zhang, R. and Shen, J. (2015) ‘The average correlation signal based stochastic subspace identification for the online modal analysis of a dump truck frameJournal of vibroengineering , 17 (4), pp. 1971-1988. ISSN 1392-8716

Lane, M., Ashari, D., Gu, F. and Ball, A. (2015) ‘Investigation of Motor Current Signature Analysis in Detecting Unbalanced Motor Windings of an Induction Motor with Sensorless Vector Control Drive’. In: Vibration Engineering and Technology of Machinery. : Springer. pp. 801-810. ISBN 978-3-319-09918-7

Feng, G., Zhen, D., Tian, X., Gu, F. and Ball, A. (2015) ‘A Novel Method to Improve the Resolution of Envelope Spectrum for Bearing Fault Diagnosis Based on a Wireless Sensor Node’. In: Vibration Engineering and Technology of Machinery. : Springer. pp. 765-775. ISBN 978-3-319-09918-7

2014

He, X., Zhao, L., Yang, H., Xing, B., Wang, Y., Deng, C., Gu, F. and Ball, A. (2014) ‘Investigations of strength and energy absorption of clinched jointsComputational Materials Science , 94, pp. 58-65. ISSN 0927-0256

Hamed, M., Tesfa, B., Fengshou, G. and Ball, A. (2014) ‘A study of the Suspension System for the Diagnosis of Dynamic Characteristics’. In: Proceedings of the 20th International Conference on Automation and Computing (ICAC), 2014. Cranfield, UK: IEEE. .

Abuhabaya, A., Gu, F. and Ball, A. (2014) ‘Combustion heat release models of biodiesels’. In: 2nd World Congress on Petrochemistry and Chemical Engineering, 27th - 29th October 2014, Las Vegas, USA

Wang, R., Chen, Z., Xun, H., Schmidt, K., Gu, F. and Ball, A. (2014) ‘Modelling and Validation of a Regenerative Shock Absorber System’. In: The 20th International Conference on Automation and Computing (ICAC'14), 12-13 September 2014, Cranfield University Bedfordshire MK43 0AL UK

Moamar, H., Tesfa, B., Fengshou, G. and Ball, A. (2014) ‘Vehicle Suspension Performance Analysis Based on Full Vehicle Model for Condition Monitoring Development’. In: VETOMAC-X 2014, 9-11th September 2014, University of Manchester, UK

Towsyfyan, H., Hassin, O., Gu, F. and Ball, A. (2014) ‘Characterization of Acoustic Emissions from Mechanical Seals for Fault Detection’. In: The 53rd Annual Conference of The British Institute of Non-Destructive Testing September 2014 Manchester., 9-11 September 2014, The Palace Hotel, Manchester, UK

Aburass, A., Yangchun, G., Tie, W., Fengshou, G., Ball, A. and Brown, D. (2014) ‘Investigation of the Effect of Biodiesel Blends on Fuel Injection Pumps based on Vibration and Pressure Measurements’. In: VETOMAC-X 2014, 9-11th September 2014, Manchester Conference Centre (Days Hotel), University of Manchester, UK , p. 10

Ahmed, M., Smith, A., Gu, F. and Ball, A. (2014) ‘Fault Diagnosis of Reciprocating Compressors Using Revelance Vector Machines with A Genetic Algorithm Based on Vibration Data’. In: The 20th International Conference on Automation and Computing (ICAC'14), 12-13 September 2014, Cranfield University

Gu, F., Abdalla, G., Zhang, R., Xun, H. and Ball, A. (2014) ‘A Novel Method for the Fault Diagnosis of a Planetary Gearbox based on Residual Sidebands from Modulation Signal Bispectrum Analysis’. In: Comadem 2014, 16th - 18th September 2014, Brisbane, Australia

Feng, G., Tian, X., Gu, J., Yang, D., Gu, F. and Ball, A. (2014) ‘An adaptive envelope analysis in a wireless sensor network for bearing fault diagnosis using fast kurtogram algorithm’. In: Comadem 2014, 16th - 18th September 2014, Brisbane, Australia

He, X., Gu, F. and Ball, A. (2014) ‘A review of numerical analysis of friction stir weldingProgress in Materials Science , 65, pp. 1-66. ISSN 0079-6425

Wang, R., Chen, Z., Xun, H., Schmidt, K., Gu, F. and Ball, A. (2014) ‘Modelling and Validation of a Regenerative Shock Absorber System’. In: The 20th International Conference on Automation and Computing (ICAC'14), 12-13 September 2014, Cranfield University Bedfordshire MK43 0AL UK , pp. 1-6

Wei, N., Gu, F., Li, G., Wang, T. and Ball, A. (2014) ‘Characterising the friction and wear between the piston ring and cylinder liner based on acoustic emission analysis’. In: 21st International Congress on Sound and Vibration, 13th - 17th July, 2014, Beijing, China

Abdalla, G., Tian, X., Zhen, D., Gu, F. and Ball, A. (2014) ‘Misalignment diagnosis of a planetary gearbox based on vibration analysis’. In: 21st International Congress on Sound and Vibration, 13th - 17th July, 2014, Beijing, China

Jiang, K., Xu, G., Liang, L., Tao, T. and Gu, F. (2014) ‘The Recovery of Weak Impulsive Signals Based on Stochastic Resonance and Moving Least Squares FittingSensors , 14 (8), pp. 13692-13707. ISSN 1424-8220

Hamomd, O., Tian, X., Chen, Z., Abdulrahman, A., Gu, F. and Ball, A. (2014) ‘A new method of vibration analysis for the diagnosis of impeller in a centrifugal pump’. In: 21st International Congress on Sound and Vibration, 13th - 17th July, 2014, Beijing, China

Ahmaida, A., Zhen, D., Gu, F. and Ball, A. (2014) ‘Gear wear process monitoring using acoustic signals’. In: 21st International Congress on Sound and Vibration, 13th - 17th July, 2014, Beijing, China

Tesfa, B., Mishra, R., Gu, F. and Ball, A. (2014) ‘NOx Emission Prediction Based on Measurement of in-Cylinder Pressure for CI Engine Running with Diesel and BiodieselInternational Journal of Automotive Engineering and Technologies , 3 (2). ISSN 2146-9067

Gu, F., Tian, X., Chen, Z., Rehab, I. and Ball, A. (2014) ‘Fault severity diagnosis of rolling element bearings based on kurtogram and envelope analysisInternational journal of structural analysis & design , 1 (2). ISSN 2372 - 4102

Gu, F., Wang, T., Alwodai, A., Tian, X., Shao, Y. and Ball, A. (2014) ‘A new method of accurate broken rotor bar diagnosis based on modulation signal bispectrum analysis of motor current signalsMechanical Systems and Signal Processing . ISSN 0888-3270

Al-Braik, A., Hamomd, O., Gu, F. and Ball, A. (2014) ‘Diagnosis of Impeller Faults in a Centrifugal Pump Using Vibration Signals’. In: Eleventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 10th - 12th June 2014, Manchester, UK

Rehab, I., Tian, X., Gu, F. and Ball, A. (2014) ‘The fault detection and severity diagnosis of rolling element bearings using modulation signal bispectrum’. In: Eleventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 10th - 12th June 2014, Manchester, UK

Ashari, D., Lane, M., Gu, F. and Ball, A. (2014) ‘Detection and Diagnosis of Broken Rotor Bar Based on the Analysis of Signals from a Variable Speed Drive’. In: 3rd International Workshop and Congress on eMaintenance, 17th - 18th June 2014, Lulea, Sweden

Abusaad, S., Benghozzi, A., Brethee, K., Gu, F. and Ball, A. (2014) ‘Investigating the Effect of Water Contamination on Gearbox Lubrication based upon Motor Control Data from a Sensorless Drive’. In: 3rd International Workshop and Congress on eMaintenance, 17th - 18th June 2014, Lulea, Sweden

Hamed, M., Tesfa, B., Gu, F. and Ball, A. (2014) ‘Effects of Tyre Pressure on Vehicle Suspension Performance’. In: World Symposium on Mechanics Engineering & Applied Physics ( WSMAEP'14), 18th - 20th June 2014, Sousse, Tunisia

Xu, X., Xu, H., Deng, H., Gu, F. and Talbot, C. (2014) ‘An investigation of a hypocycloid mechanism based twin-rotor piston engineProceedings of the Institution of Mechanical Engineers, Part C: Journal of Mechanical Engineering Science . ISSN 0954-4062

Tesfa, B., Gu, F., Mishra, R. and Ball, A. (2014) ‘Emission Characteristics of a CI Engine Running with a Range of Biodiesel FeedstocksEnergies , 7 (1), pp. 334-350. ISSN ISSN 1996-1073

Gu, F., Tian, X., Chen, Z., Wang, T., Rehab, I. and Ball, A. (2014) ‘Fault severity diagnosis of rolling element bearings based on kurtogram and envelope analysis’. In: Proceedings of the International conference on advances in civil, Structural and Mechanical Engineering. : Institute of Research Engineers and Doctors. . ISBN 978-981-07-8859-9

Tian, X., Feng, G., Chen, Z., Albraik, A., Gu, F. and Ball, A. (2014) ‘The investigation of motor current signals from a centrifugal pump for fault diagnosis’. In: Comadem 2014, 16th - 18th September 2014, Brisbane, Australia

2013

Aburass, A., Zhen, D., Gu, F. and Ball, A. (2013) ‘Combustion Diagnostics of a Diesel Engine with Biodiesel Fuels based on Vibro-acoustics and In-Cylinder Pressure Measurements’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. Huddersfield: University of Huddersfield. pp. 13-18. ISBN 9781862181212

Towsyfyan, H., Gu, F. and Ball, A. (2013) ‘A review of mechanical seals tribology and condition monitoring’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. Huddersfield: University of Huddersfield. pp. 200-205. ISBN 9781862181212

Feng, G., Zhen, D., Aliwan, M., Gu, F. and Ball, A. (2013) ‘Investigation of Wireless Protocols for Remote Condition Monitoring’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. Huddersfield: University of Huddersfield. pp. 19-24. ISBN 9781862181212

Abdalla, G., Ball, A. and Gu, F. (2013) ‘Fault Detection and Diagnosis of Ball Bearing Using Advanced Vibration Analysis Techniques’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. Huddersfield: University of Huddersfield. p. 224. ISBN 9781862181212

Hamomd, O., Ball, A., Gu, F. and Thobiani, F. (2013) ‘Pump Rotor System Monitoring Based on Advanced Measurements and Analysis Techniques’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. Huddersfield: University of Huddersfield. p. 230. ISBN 9781862181212

Ahmaida, A., Zhen, D., Gu, F. and Ball, A. (2013) ‘Fatigue Prediction of a Gear Transmission System based on Vibro-Acoustic Measurements’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. Huddersfield: University of Huddersfield. pp. 93-99. ISBN 9781862181212

Li, G., Gu, F., Wang, T. and Ball, A. (2013) ‘The Potential Effects of Alternative Fuels on the Lubricating Condition of Compression-ignition Engines’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. Huddersfield: University of Huddersfield. p. 233. ISBN 9781862181212

Wang, R., Cattley, R., Tian, X., Gu, F. and Ball, A. (2013) ‘A Valid Model of a Regenerative Hybrid Shock Absorber System’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. Huddersfield: University of Huddersfield. pp. 206-211. ISBN 9781862181212

Rehab, I., Tian, X., Gu, F. and Ball, A. (2013) ‘Roller element bearing fault detection and diagnosis based on an optimised envelope analysis’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. Huddersfield: University of Huddersfield. pp. 176-181. ISBN 9781862181212

Alghadhi, M., Ball, A., Gu, F. and Cattley, R. (2013) ‘Standard drive cycle recreation from general driving behaviour’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. Huddersfield: University of Huddersfield. pp. 100-105. ISBN 9781862181212

Wei, N., Ball, A. and Gu, F. (2013) ‘A Study of Alternative Fuels Potential Effects on the Combustion Engines using acoustic emission’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. Huddersfield: University of Huddersfield. p. 239. ISBN 9781862181212

Smith, A. and Gu, F. (2013) ‘Distributional considerations in inference based condition monitoring stages: detection, diagnosis and prognosis.’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. Huddersfield: University of Huddersfield. p. 238. ISBN 9781862181212

Baqqar, M., Tran, V., Gu, F. and Ball, A. (2013) ‘Comparison between adaptive neuro-fuzzy inference system and general regression neural networks for gearbox fault detection using motor operating parameters’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. Huddersfield: University of Huddersfield. pp. 118-126. ISBN 9781862181212

Hamed, M., Tesfa, B., Gu, F. and Ball, A. (2013) ‘A study of the influence of vehicle tyre pressure on suspension system response using a full car model’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2013 : CEARC'13. Huddersfield: University of Huddersfield. pp. 7-12. ISBN 9781862181212

Tesfa, B., Gu, F., Mishra, R. and Ball, A. (2013) ‘Emission Characteristics of CI Engine Running with Biodiesel’. In: World Congress on Petrochemistry and Chemical Engineering, 18th - 20th November 2013, San Antonio, Texas, USA

Alwodai, A., Shao, Y., Yuan, X., Ahmed, M., Gu, F. and Ball, A. (2013) ‘Inter-Turn Short Circuit Detection Based on Modulation Signal Bispectrum Analysis of Motor Current Signals’. In: Proceedings of the 19th International Conference on Automation and Computing (ICAC) 2013: Future Energy and Automation. London, UK: Brunel University. . ISBN 978-1908549082

Wang, R., Tran, V., Gu, F. and Ball, A. (2013) ‘An Investigation on Energy Recovery Analysis of Active Suspension System’. In: Proceedings of the 19th International Conference on Automation and Computing (ICAC) 2013: Future Energy and Automation. London, UK: Brunel University. . ISBN 978-1908549082

Feng, G., Mustafa, A., Gu, J., Zhen, D., Gu, F. and Ball, A. (2013) ‘The Real-time Implementation of Envelope Analysis for Bearing Fault Diagnosis based on Wireless Sensor Network’. In: Proceedings of the 19th International Conference on Automation and Computing (ICAC) 2013: Future Energy and Automation. London, UK: Brunel University. . ISBN 978-1908549082

Hamed, M., Tesfa, B., Aliwan, M., Li, G., Gu, F. and Ball, A. (2013) ‘The Influence of Vehicle Tyres Pressure on the Suspension System Response by Applying the Time-Frequency Approach’. In: Proceedings of the 19th International Conference on Automation and Computing (ICAC) 2013: Future Energy and Automation. London, UK: Brunel University. . ISBN 978-1908549082

Towsyfyan, H., Raharjo, P., Gu, F. and Ball, A. (2013) ‘Characterization of Acoustic Emissions from Journal Bearings for Fault Detection’. In: NDT 2013, 10th-12th September 2013, Telford, UK

Tian, X., Wang, T., Chen, Z., Gu, F. and Ball, A. (2013) ‘A transient enhancement method for two-stage helical gearbox fault diagnosis based on ALEJournal of Signal and Information Processing , 4 (3B), pp. 132-137. ISSN 2159-4481

Alwodai, A., Wang, T., Chen, Z., Gu, F., Cattley, R. and Ball, A. (2013) ‘A Study of Motor Bearing Fault Diagnosis using Modulation Signal Bispectrum Analysis of Motor Current SignalsJournal of Signal and Information Processing , 4 (3B), pp. 132-137. ISSN 2159-4481

Tran, V., Yang, B., Gu, F. and Ball, A. (2013) ‘Thermal Image Enhancement using Bi-dimensional Empirical Mode Decomposition in Combination with Relevance Vector Machine for Rotating Machinery Fault DiagnosisMechanical Systems and Signal Processing , 38 (2), pp. 601-614. ISSN 0888-3270

Tesfa, B., Gu, F., Mishra, R. and Ball, A. (2013) ‘LHV Predication Models and LHV Effect on the Performance of CI Engine Running with Biodiesel BlendsEnergy Conversion and Management , 71, pp. 217-226. ISSN 0196-8904

Hu, L., Hu, N., Zhang, X., Gu, F. and Gao, M. (2013) ‘Novelty detection methods for online health monitoring and post data analysis of turbopumpsJournal of Mechanical Science and Technology , 27 (7), pp. 1933-1942. ISSN 1738-494X

Hu, L., Hu, N., Zhang, X., Gu, F. and Gao, M. (2013) ‘Novelty detection methods for online health monitoring and post data analysis of turbopumpsJournal of Mechanical Science and Technology , 27 (7), pp. 1933-1942. ISSN 1976-3824

Abusaad, S., Benghozzi, A., Shao, Y., Gu, F. and Ball, A. (2013) ‘Utilizing Data from a Sensorless AC Variable Speed Drive for Detecting Mechanical MisalignmentsKey Engineering Materials , 569, pp. 465-472. ISSN 1013-9826

Elbarghathi, F., Tian, X., Tung Tran, V., Gu, F. and Ball, A. (2013) ‘Multi-stages helical gearbox fault detection using vibration signal and Morlet wavelet transform adapted by information entropy difference’. In: COMADEM 2013, 11-13 June 2013, Helsinki, Finland

Baqqar, M., Tran, V., Gu, F. and Ball, A. (2013) ‘Gearbox fault detection using static data and adaptive neurofuzzy inference system’. In: COMADEM 2013, 11th-13th June /2013, Helsinki, Finland

Abusaad, S., Benghozzi, A., Gu, F. and Ball, A. (2013) ‘Utilizing Data from a Sensorless AC Variable Speed Drive for Detecting Mechanical Misalignments’. In: Damage Assessment of Structures. Dublin, Ireland: Trans Tech Publications Ltd.. pp. 465-472. ISBN 978-3-03785-796-0

He, X., Zhen, D., Xing, B., Zeng, K., Ding, Y., Gu, F. and Ball, A. (2013) ‘Free Vibration Measurements of Single-Lap Cantilevered SPR BeamsApplied Mechanics and Materials , 321-32, pp. 33-36. ISSN 1662-7482

Zhen, D., Wang, T., Gu, F., Tesfa, B. and Ball, A. (2013) ‘Acoustic measurements for the combustion diagnosis of diesel engines fuelled with biodieselsMeasurement Science and Technology , 24 (5), p. 055005. ISSN 0957-0233

Tesfa, B., Mishra, R., Gu, F. and Ball, A. (2013) ‘Combustion and Performance Characteristics of CI Engine Running with BiodieselEnergy , 51 (1), pp. 101-115. ISSN 0360-5442

Zhen, D., Wang, T., Gu, F. and Ball, A. (2013) ‘Fault diagnosis of motor drives using stator current signal analysis based on dynamic time warpingMechanical Systems and Signal Processing , 34 (1-2), pp. 191-202. ISSN 0888-3270

He, X., Baoying, X., Kai, Z., Gu, F. and Ball, A. (2013) ‘Numerical and experimental investigations of self-piercing rivetingInternational Journal of Advanced Manufacturing Technology , 69 (1-4), pp. 715-721. ISSN 0268-3768

2012

Alwodai, A., Xia, X., Shao, Y., Gu, F. and Ball, A. (2012) ‘Modulation Signal Bispectrum Analysis of Motor Current Signals for Stator Fault Diagnosis’. In: 18th International Conference on Automation and Computing (ICAC), 2012. Loughborough, UK: IEEE. pp. 1-6. ISBN 9781908549006

Chen, Z., Wang, T., Zhao, Z., Shen, J., Zhen, D. and Gu, F. (2012) ‘The Lightweight Design of a Dump Truck Frame based on Dynamic Responses’. In: Proceedings of the 18th International Conference on Automation and Computing (ICAC) 2012: Integration of Design and Engineering. Loughborough, UK: IEEE. pp. 1-5. ISBN 978-1-4673-1722-1

Lin, J., Chen, Q., Tian, X. and Gu, F. (2012) ‘Fault Diagnosis of Rolling Bearings using Multifractal Detrended Fluctuation Analysis and Mahalanobis Distance Criterion’. In: Proceedings of the 18th International Conference on Automation and Computing (ICAC) 2012: Integration of Design and Engineering. Loughborough, UK: IEEE. pp. 1-6. ISBN 9781467317221

Benghozzi, A., Shao, Y., Shi, Z., Gu, F. and Ball, A. (2012) ‘The Diagnosis of a Gearbox Transmission System Using Electrical Control Parameters’. In: Proceedings of the 18th International Conference on Automation and Computing (ICAC) 2012: Integration of Design and Engineering. Loughborough, UK: IEEE. pp. 1-6. ISBN 9781908549006 / 9781467317221

Tesfa, B., Gu, F., Mishra, R. and Ball, A. (2012) ‘Performance of CI Engines Fuelled with Biodiesel Blends during Transient Operations’. In: Powertrain Modelling and Control Testing, Mapping and Calibration, 4th -6th September 2012, University of Bradford

Baqqar, M., Wang, T., Ahmed, M., Gu, F., Lu, J. and Ball, A. (2012) ‘A General Regression Neural Network Model for Gearbox Fault Detection using Motor Operating Parameters’. In: 18th International Conference On Automation And Computing (ICAC), 2012. Cardiff, UK: IEEE. pp. 584-588. ISBN 978-1-4673-1559-3

Ahmed, M., Gu, F. and Ball, A. (2012) ‘Fault Detection and Diagnosis using Principal Component Analysis of Vibration Data from a Reciprocating Compressor’. In: 18th International Conference On Automation And Computing (ICAC), 2012. Cardiff, UK: IEEE. pp. 461-466. ISBN 978-1-4673-1559-3

Chen, Z., Wang, T., Gu, F., Haram, M. and Ball, A. (2012) ‘Gear Transmission Fault Diagnosis Based on the Bispectrum Analysis of Induction Motor Current SignaturesJournal of Mechanical Engineering , 48 (21), pp. 84-90. ISSN 0577-6686

Raharjo, P., Abdusslam, S., Gu, F. and Ball, A. (2012) ‘Vibro-Acoustic Characteristic of A Self Aligning Spherical Journal Bearing due to Eccentric Bore Fault’. In: CM 2012 and MFPT 2012: The Ninth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 12th - 14th June 2012, London, UK

Tesfa, B., Horler, G., Al Thobiani, F., Gu, F. and Ball, A. (2012) ‘A clamping force measurement system for monitoring the condition of bolted joints on railway track joints and pointsJournal of Physics: Conference Series , 364 (1), p. 012021. ISSN 1742-6596

Raharjo, P., Abdusslam, S., Gu, F. and Ball, A. (2012) ‘Vibro-Acoustic Characteristic of A Self Aligning Spherical Journal Bearing due to Eccentric Bore Fault’. In: The Ninth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 12th - 14th June 2012, London, UK

Tian, X., Gu, F., Zhen, D., Tran, V. and Ball, A. (2012) ‘A study on transient enhancement for fault diagnosis based on an active noise control system’. In: CM 2012 and MFPT 2012: The Ninth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 12th - 14th June 2012, London, UK

Zhen, D., Wang, T., Gu, F., Tran, V. and Ball, A. (2012) ‘Combustion Analysis of a CI Engine with Biodiesel Blends based on Vibro-Acoustic Measurement’. In: CM 2012 and MFPT 2012: The Ninth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 12th - 14th June 2012, London, UK

Elbarghathi, F., Wang, T., Zhen, D., Gu, F. and Ball, A. (2012) ‘Two Stage Helical Gearbox Fault Detection and Diagnosis based on Continuous Wavelet Transformation of Time Synchronous Averaged Vibration SignalsJournal of Physics: Conference Series , 364, p. 012083. ISSN 1742-6596

Hu, N., Hu, L., Zhang, X., Gu, F. and Ball, A. (2012) ‘Enhancement detection of characteristic signal using stochastic resonance by adding a harmonic excitationJournal of Physics: Conference Series , 364, p. 012046. ISSN 1742-6596

Ahmed, M., Gu, F. and Ball, A. (2012) ‘Fault Detection of Reciprocating Compressors using a Model from Principles Component Analysis of VibrationsJournal of Physics: Conference Series , 364, p. 012133. ISSN 1742-6596

Zhang, H., Shi, Z., Zhen, D., Gu, F. and Ball, A. (2012) ‘Stability Analysis of a Turbocharger Rotor System Supported on Floating Ring BearingsJournal of Physics: Conference Series , 364, p. 012032. ISSN 1742-6596

Arebi, L., Gu, F. and Ball, A. (2012) ‘A comparative study of misalignment detection using a novel Wireless Sensor with conventional Wired SensorsJournal of Physics: Conference Series , 364, p. 012049. ISSN 1742-6596

Zhen, D., Tesfa, B., Yuan, X., Wang, R., Gu, F. and Ball, A. (2012) ‘An investigation of the acoustic characteristics of a compression ignition engine operating with biodiesel blendsJournal of Physics: Conference Series , 364, p. 012015. ISSN 1742-6596

Abdusslam, S., Raharjo, P., Gu, F. and Ball, A. (2012) ‘Bearing defect detection and diagnosis using a time encoded signal processing and pattern recognition methodJournal of Physics: Conference Series , 364, p. 012036. ISSN 1742-6596

Alwodai, A., Gu, F. and Ball, A. (2012) ‘A Comparison of Different Techniques for Induction Motor Rotor Fault DiagnosisJournal of Physics: Conference Series , 364, p. 012066. ISSN 1742-6596

Haram, M., Wang, T., Gu, F. and Ball, A. (2012) ‘Electrical Motor Current Signal Analysis using a Modulation Signal Bispectrum for the Fault Diagnosis of a Gearbox DownstreamJournal of Physics: Conference Series , 364, p. 012050. ISSN 1742-6596

Pislaru, C., Lane, M., Ball, A. and Gu, F. (2012) ‘Fault Detection of Gearbox from Inverter Signals Using Advanced Signal Processing TechniquesJournal of Physics: Conference Series , 364, p. 012080. ISSN 1742-6596

Raharjo, P., Tesfa, B., Gu, F. and Ball, A. (2012) ‘A Comparative Study of the Monitoring of a Self Aligning Spherical Journal using Surface Vibration, Airborne Sound and Acoustic EmissionJournal of Physics: Conference Series , 364, p. 012035. ISSN 1742-6596

Ngigi, R., Pislaru, C., Ball, A. and Gu, F. (2012) ‘Modern techniques for condition monitoring of railway vehicle dynamicsJournal of Physics: Conference Series , 364, p. 012016. ISSN 1742-6596

Albraik, A., Al Thobiani, F., Gu, F. and Ball, A. (2012) ‘Diagnosis of Centrifugal Pump Faults Using Vibration MethodsJournal of Physics: Conference Series , 364, p. 012139. ISSN 1742-6596

Fan, B., Hu, N., Hu, L. and Gu, F. (2012) ‘Application of Phase Space Warping on Damage Tracking for Bearing FaultJournal of Physics: Conference Series , 364, p. 012025. ISSN 1742-6596

Hu, L., Hu, N., Fan, B. and Gu, F. (2012) ‘Application of novelty detection methods to health monitoring and typical fault diagnosis of a turbopumpJournal of Physics: Conference Series , 364, p. 012128. ISSN 1742-6596

Tesfa, B., Horler, G., Al Thobiani, F., Gu, F. and Ball, A. (2012) ‘A clamping force measurement system for monitoring the condition of bolted joints on railway track joints and pointsJournal of Physics: Conference Series , 364, p. 012021. ISSN 1742-6596

Anyakwo, A., Pislaru, C., Ball, A. and Gu, F. (2012) ‘Modelling and simulation of dynamic wheel-rail interaction using a roller rigJournal of Physics: Conference Series , 364, p. 012060. ISSN 1742-6596

Zhen, D., Zhao, H., Gu, F. and Ball, A. (2012) ‘Phase-compensation-based dynamic time warping for fault diagnosis using the motor current signalMeasurement Science and Technology , 23 (5), p. 055601. ISSN 0957-0233

Tesfa, B., Gu, F., Anyakwo, A., Al Thobiani, F. and Ball, A. (2012) ‘Prediction of metal pm emission in rail tracks for condition monitoring application’. In: Railway Condition Monitoring and Non-Destructive Testing (RCM 2011), 5th IET Conference on. London: IET. pp. 1-6.

Elbarghathi, F., Ball, A. and Gu, F. (2012) ‘Two stage helical gearbox fault detection and diagnosis based on continuous wavelet transformation of time synchronous averaged vibration signals’. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. Huddersfield: University of Huddersfield. . ISBN 978-1-86218-106-9

Ashari, D., Pislaru, C., Ball, A. and Gu, F. (2012) ‘Artificial intelligence-based condition monitoring for practical electrical drives’. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. Huddersfield: University of Huddersfield. p. 143. ISBN 978-1-86218-106-9

Anyakwo, A., Pislaru, C., Ball, A. and Gu, F. (2012) ‘Dynamic simulation of a roller rig’. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. Huddersfield: University of Huddersfield. pp. 51-56. ISBN 978-1-86218-106-9

Ngigi, R., Pislaru, C., Ball, A. and Gu, F. (2012) ‘Review of control strategies used in modern railway vehicles’. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. Huddersfield: University of Huddersfield. p. 160. ISBN 978-1-86218-106-9

Wang, R., Gu, F. and Ball, A. (2012) ‘Energy recovery system optimisation in automotives’. In: Proceedings of The Queen’s Diamond Jubilee Computing and Engineering Annual Researchers’ Conference 2012: CEARC’12. Huddersfield: University of Huddersfield. p. 161. ISBN 978-1-86218-106-9

Treetrong, J., Sinha, J., Gu, F. and Ball, A. (2012) ‘Parameter Estimation for Electric Motor Condition MonitoringAdvances in Vibration Engineering , 11 (1), pp. 75-84. ISSN 0972-5768

Tesfa, B., Mishra, R., Gu, F. and Ball, A. (2012) ‘Water Injection Effects on the Performance and Emission Characteristics of a CI Engine Operating with BiodieselRenewable Energy , 37 (1), pp. 333-344. ISSN 0960-1481

He, X., Gu, F. and Ball, A. (2012) ‘Recent development in finite element analysis of self-piercing riveted jointsThe International Journal of Advanced Manufacturing Technology , 58 (5-8), pp. 643-649. ISSN 0268-3768

2011

Anyakwo, A., Pislaru, C., Ball, A. and Fengshou, G. (2011) ‘Modelling the Dynamic Behaviour of the Wheel-Rail Interface by Using a Novel 3D Wheel-Rail Contact Model’. In: 5th IET Conference on Railway Condition Monitoring and Non-Destructive Testing (RCM 2011), 29-30 November 2011, Derby Conference Centre, UK , p. 8A4

Tesfa, B., Gu, F., Anyakwo, A., Al Thobiani, F. and Ball, A. (2011) ‘Prediction of metal pm emission in rail tracks for condition monitoring application’. In: RCM 2011: The 5th IET conference on Railway Condition Monitoring and Non-Destructive Testing, 29-30 Nov 2011, Derby, UK , pp. 1-6

Ahmed, M., Abdusslam, S., Baqqar, M., Gu, F. and Ball, A. (2011) ‘Fault Classification of Reciprocating Compressor Based on Neural Networks and Support Vector Machines’. In: Proceedings of the 17th International Conference on Automation & Computing. Huddersfield: Chinese Automation and Computing Society. . ISBN 978-1-86218-098-7

Abdusslam, S., Ahmed, M., Raharjo, P., Gu, F. and Ball, A. (2011) ‘Time Encoded Signal Processing and Recognition of Incipient Bearing Faults’. In: Proceedings of the 17th International Conference on Automation & Computing. Huddersfield: Chinese Automation and Computing Society. . ISBN 978-1-86218-098-7

Baqqar, M., Ahmed, M. and Gu, F. (2011) ‘Data Mining for Gearbox Condition Monitoring’. In: Proceedings of the 17th International Conference on Automation & Computing. Huddersfield: Chinese Automation and Computing Society. . ISBN 978-1-86218-098-7

Anyakwo, A., Pislaru, C., Ball, A. and Gu, F. (2011) ‘A Novel Approach To Modelling And Simulation Of The Dynamic Behaviour Of The Wheel-Rail Interface’. In: Proceedings of the 17th International Conference on Automation & Computing. Huddersfield: Chinese Automation and Computing Society. . ISBN 978-1-86218-098-7

Cheng, Z., Hu, N., Gu, F. and Qin, G. (2011) ‘Pitting damage levels estimation for planetary gear sets based on model simulation and grey relational analysisTransactions of the Canadian Society for Mechanical Engineering , 35 (3), pp. 403-417. ISSN 0315-8977

Arebi, L., Gu, F., Hu, N. and Ball, A. (2011) ‘Misalignment Detection using a Wireless Sensor Mounted on a Rotating Shaft’. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostics Engineering Management. Stavanger, Norway: COMADEM. pp. 1289-1299. ISBN 0954130723

Hu, L., Hu, N., Qin, G. and Gu, F. (2011) ‘Turbopump Condition Monitoring Using Incremental Clustering and One-class Support Vector MachineChinese Journal of Mechanical Engineering , 24 (3), pp. 474-489. ISSN 1000-9345

Raharjo, P., Abdusslam, S., Gu, F., Wang, T. and Ball, A. (2011) ‘An Investigation of Acoustic Emission Responses of a Self Aligning Spherical Journal Bearing’. In: The Eighth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies CM/MFPT 2011, 20th - 22nd June 2011, Cardiff, UK

Raharjo, P., Abdusslam, S., Wang, T., Gu, F. and Ball, A. (2011) ‘An Investigation of Acoustic Emission Responses of a Self Aligning Spherical Journal Bearing’. In: The Eighth International Conference on Condition Monitoring and Machinery Failure Prevention Technologies CM/MFPT 2011, 20th - 22nd June 2011, Cardiff, UK

Tesfa, B., Mishra, R., Zhang, C., Gu, F. and Ball, A. (2011) ‘NOx Prediction Based on Cylinder Pressure Measurement for Engine Emission Monitoring’. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostics Engineering Management. Norway: COMADEM. p. 212. ISBN 0954130723

Alwodai, A., Gu, F. and Ball, A. (2011) ‘Motor Current Signature Analysis of a Variable Speed Drive for Motor Fault Diagnosis’. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). : COMADEM. pp. 884-892. ISBN 0954130723

Tesfa, B., Mishra, R., Zhang, C., Gu, F. and Ball, A. (2011) ‘NOx Prediction Based on Cylinder Pressure Measurement for Engine Emission Monitoring’. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). : COMADEM. pp. 1330-1340. ISBN 0954130723

Haram, M., Wang, T., Gu, F. and Ball, A. (2011) ‘An Investigation of the Electrical Response of A Variable Speed Motor Drive for Mechanical Fault Diagnosis’. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). : COMADEM. pp. 867-874. ISBN 0954130723

Zhen, D., Gu, F., Zhou, X. and Ball, A. (2011) ‘Fault Signal Enhancement using Adaptive Filtering Techniques for Gearbox Monitoring’. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). : COMADEM. pp. 251-258. ISBN 0954130723

Al Thobiani, F., Gu, F. and Ball, A. (2011) ‘Monitoring Cavitation in Centrifugal Pumps using a Noninvasive Capacitance Sensor’. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). : COMADEM. pp. 875-883. ISBN 0954130723

Elamin, F., Gu, F. and Ball, A. (2011) ‘Diesel engine lubricating oil condition and performance monitoring using acoustic emission measurements’. In: 24th International Congress on Condition Monitoring and Diagnostics Engineering Management (COMADEM 2011), 30th May - 1st June 2011, Stavanger, Norway

Hu, L., Hu, G., Qin, F. and Gu, F. (2011) ‘Turbopump Condition Monitoring Using Incremental Clustering and One-class Support Vector MachineChinese Journal of Mechanical Engineering , 24 (3), pp. 474-479. ISSN 1000-9345

Alwodai, A., Gu, F. and Ball, A. (2011) ‘Motor Current Signature Analysis of a Variable Speed Drive for Motor Fault Diagnosis’. In: Proceedings of the 24th International Congress on Condition Monitoring and Diagnostic Engineering Management (COMADEM 2011). : COMADEM. pp. 884-892. ISBN 0954130723

Tesfa, B., Mishra, R., Gu, F. and Ball, A. (2011) ‘Combustion Characteristics of CI Engine Running with Biodiesel Blends’. In: International Conference on Renewable Energies and Power Quality (ICREPQ'11), 13-15 April 2011, Las Palmas de Gran Canaria, Spain , pp. 1-8

Hu, N., Xia, L., Gu, F. and Qin, G. (2011) ‘A Novel Transform Demodulation Algorithm for Motor Incipient Fault DetectionIEEE Transactions on Instrumentation and Measurement , 60 (2), pp. 480-487. ISSN 0018-9456

Zhou, X., Shao, Y., Zhen, D., Gu, F. and Ball, A. (2011) ‘Gear Fault Signal Detection based on an Adaptive Fractional Fourier Transform FilterJournal of Physics: Conference Series , 305 (1), p. 012022. ISSN 1742-6596

Shao, Y., Liang, J., Gu, F., Chen, Z. and Ball, A. (2011) ‘Fault Prognosis and Diagnosis of an Automotive Rear Axle Gear Using a RBF-BP Neural NetworkJournal of Physics: Conference Series , 305 (1), p. 012063. ISSN 1742-6596

Ahmed, M., Gu, F. and Ball, A. (2011) ‘Feature Selection and Fault Classification of Reciprocating Compressors using a Genetic Algorithm and a Probabilistic Neural NetworkJournal of Physics: Conference Series , 305 (1), p. 012112. ISSN 1742-6596

Zhang, H., Shi, Z., Gu, F. and Ball, A. (2011) ‘Modelling of Outer and Inner Film Oil Pressure for Floating Ring Bearing Clearance in TurbochargersJournal of Physics: Conference Series , 305 (1), p. 012021. ISSN 1742-6596

Zhen, D., Alibarbar, A., Zhou, X., Gu, F. and Ball, A. (2011) ‘Electrical Motor Current Signal Analysis using a Dynamic Time Warping Method for Fault DiagnosisJournal of Physics: Conference Series , 305 (1), p. 012093. ISSN 1742-6596

Gu, F., Shao, Y., Naid, A. and Ball, A. (2011) ‘Electrical motor current signal analysis using a modified bispectrum for fault diagnosis of downstream mechanical equipmentMechanical Systems and Signal Processing , 25 (1), pp. 360-372. ISSN 0888-3270

2010

Elamin, F., Gu, F. and Ball, A. (2010) ‘Online Monitoring of Engine Oil Quality Based on AE Signal Analysis’. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. Huddersfield: University of Huddersfield. pp. 116-123. ISBN 9781862180932

Zhen, D., Gu, F. and Ball, A. (2010) ‘The Study of Acoustic Source Localization using a Small Microphone Array for Condition Monitoring’. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. Huddersfield: University of Huddersfield. pp. 14-19. ISBN 9781862180932

Tesfa, B., Mishra, R., Gu, F. and Powles, N. (2010) ‘Prediction Models for Density and Viscosity of Biodiesel and their Effects on Fuel Supply System in CI EnginesRenewable Energy , 35 (12), pp. 2752-2760. ISSN 0960-1481

Appadoo, R., Ball, A. and Gu, F. (2010) ‘Optimizing condition monitoring techniques applied to a three stage reciprocating compressor in a FMCG industry’. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. Huddersfield: University of Huddersfield. p. 185. ISBN 9781862180932

Arebi, L., Gu, F. and Ball, A. (2010) ‘Rotor Misalignment Detection using a Wireless Sensor and a Shaft Encoder’. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. Huddersfield: University of Huddersfield. pp. 6-13. ISBN 9781862180932

Albarbar, A., Gu, F. and Ball, A. (2010) ‘Diesel engine fuel injection monitoring using acoustic measurements and independent component analysisMeasurement , 43 (10), pp. 1376-1386. ISSN 0263-2241

Baqqar, M., Gu, F. and Lu, J. (2010) ‘Machine Performance and Condition Monitoring Through Data Mining and Database Optimization’. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. Huddersfield: University of Huddersfield. p. 186. ISBN 9781862180932

Singh, D., Elamin, F., Gu, F., Gilkes, O., Fieldhouse, J., Jain, A., Singh, N. and Singal, S. (2010) ‘Study of friction characteristics of a diesel engine running on different viscosity grade engine oils using conventional and acoustic emissions technique’. In: 7th International Conference on Industrial Tribology (ICIT 2010), 2nd - 4th December 2010, Ranchi, India

Albarbar, A., Gu, F., Ball, A. and Starr, A. (2010) ‘Acoustic monitoring of engine fuel injection based on adaptive filtering techniquesApplied Acoustics , 71 (12), pp. 1132-1141. ISSN 0003-682X

Ahmed, M. and Gu, F. (2010) ‘Fault classification using an Artificial Neural Network based on Vibrations from a Reciprocating Compressor’. In: Future Technologies in Computing and Engineering: Proceedings of Computing and Engineering Annual Researchers' Conference 2010: CEARC’10. Huddersfield: University of Huddersfield. pp. 92-97. ISBN 9781862180932

Shao, Y., Tu, W. and Gu, F. (2010) ‘A Simulation Study of Defects in a Rolling Element Bearing using FEA’. In: International Conference on Control, Automation and Systems 2010, 27th - 30th October 2010, Gyeonggi-do, Korea

Elamin, F., Gu, F. and Ball, A. (2010) ‘Diesel Engine Injector Faults Detection Using Acoustic Emissions TechniqueModern Applied Science , 44 (9), pp. 3-13. ISSN 1913-1844

Raharjo, P., Al Thobiani, F., Gu, F. and Ball, A. (2010) ‘Early Failure Detection and Diagnostics of High Speed Self Aligning Journal Bearing’. In: COMADEM 2010, June 28-July 2 2010, Nara, Japan

Zhang, H., Shi, J., Gu, F. and Ball, A. (2010) ‘Bending vibration of an automotive turbocharger under the influence of rotor imbalance’. In: CM 2010 and MFPT 2010 The 7th International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Ettington Chase, Stratford-upon-Avon, England

Raharjo, P., Gu, J., Fan, Y., Gu, F. and Ball, A. (2010) ‘Early Failure Detection and Diagnostics of Self-Aligning Journal Bearing through Vibro-acoustic Analysis’. In: CM 2010 and MFPT 2010 The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, England

Arebi, L., Gu, J., Ball, A. and Gu, F. (2010) ‘Investigation of a Rotating Shaft with a Novel Integrated Wireless Accelerometer’. In: The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Ettington Chase, Stratford-upon-Avon, England, UK

Al-Arbi, S., Talbot, C., Wang, T., Fengshou, G. and Ball, A. (2010) ‘Characterization of vibration transmission paths for gearbox condition monitoring’. In: Inter noise 2010 39th International congress on Noise Control Engineering, 13-16 June 2010, Lisbon, Portugal

Elamin, F., Fan, Y., Gu, F. and Ball, A. (2010) ‘Detection of Diesel Engine Injector Faults Using Acoustic Emissions’. In: COMADEM 2010: Advances in Maintenance and Condition Diagnosis Technologies towards Sustainable Society, 28th June-2nd July 2010, Nara, Japan

Elamin, F., Glikes, O., Gu, F. and Ball, A. (2010) ‘The Analysis of Acoustic Emission Signals from the Cylinder Head of a Diesel Engine for Fault Detection’. In: CM 2010 and MFPT 2010 : The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, UK

Zhang, H., Shi, J., Gu, F. and Ball, A. (2010) ‘The bending vibration of a turbocharger under the influence of rotor imbalance’. In: CM 2010 and MFPT 2010 : The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, UK

Al Thobiani, F., Gu, F. and Ball, A. (2010) ‘The monitoring of cavitation in centrifugal pumps based on the analysis of vibro-acoustic measurements’. In: CM 2010 and MFPT 2010 : The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, UK

Shi, J., Legate, I., Gu, F., Fieldhouse, J. and Ball, A. (2010) ‘Prediction of antilock braking system condition with the vehicle stationary using a model-based approachInternational Journal of Automotive Technology , 11 (3), pp. 363-373. ISSN 1229-9138

Elamin, F., Fan, Y., Gu, F. and Ball, A. (2010) ‘Diesel Engine Valve Clearance Detection Using Acoustic EmissionAdvances in Mechanical Engineering , 2010. ISSN 1687-8132

Zhen, D., Fan, Y., Gu, F. and Ball, A. (2010) ‘A Study of Sound Source Characteristics in Active Noise Control and Fault Diagnosis’. In: Inter noise 2010-39th International congress on Noise Control Engineering, 13-16 June 2010, Lisbon, Portugal

Abdusslam, S., Gu, F. and Ball, A. (2010) ‘Bearing fault diagnosis using time encoded signal processing and recognition’. In: CM 2010 and MFPT 2010 : The Seventh International Conference on Condition Monitoring and Machinery Failure Prevention Technologies, 22-24 June 2010, Stratford-upon-Avon, UK

Tesfa, B., Mishra, R. and Gu, F. (2010) ‘Behavior of a CI Engine Running by Biodiesel under Transient Conditions’. In: General Emisions. Michigan, USA: SAE International. .

Charles, P., Sinha, J., Gu, F. and Ball, A. (2010) ‘Application of novel polar representation method for monitoring minor engine condition variationsMechanical Systems and Signal Processing , 24 (3), pp. 841-843. ISSN 0888-3270

Fan, Y., Gu, F. and Ball, A. (2010) ‘Modelling acoustic emissions generated by sliding frictionWear , 268 (5-6), pp. 811-815. ISSN 0043-1648

2009

Abdusslam, S., Gu, F. and Ball, A. (2009) ‘Bearing fault diagnosis based on vibration signals.’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. Huddersfield: University of Huddersfield. pp. 93-98. ISBN 9781862180857

Elamin, F., Fan, Y., Gu, F. and Ball, A. (2009) ‘Detection of diesel engine valve clearance by acoustic emission.’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. Huddersfield: University of Huddersfield. pp. 7-13. ISBN 9781862180857

Al-Arbi, S., Gu, F., Guan, L. and Ball, A. (2009) ‘Remotely gear condition monitoring using traditional signal processing techniques’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. Huddersfield: University of Huddersfield. pp. 111-117. ISBN 9781862180857

Tesfa, B., Mishra, R. and Gu, F. (2009) ‘Performance of Compression Ignition (CI) Engine Running on Biodiesel during Transient Condition’. In: Thirty Sixth National Conference on Fluid Mechanics and Fluid Power, 17- 19 December 2009, Pune, India , pp. 1-10

Tesfa, B., Mishra, R., Gu, F. and Ball, A. (2009) ‘Predicting specific gravity and viscosity of biodiesel fuels’. In: Proceedings of Computing and Engineering Annual Researchers' Conference 2009: CEARC’09. Huddersfield: University of Huddersfield. pp. 38-44. ISBN 9781862180857

Fazenda, B., Gu, F., Ball, A. and Guan, L. (2009) ‘Noise source localisaton in a car environment’. In: 8th International Conference on Damage Assessment of Structures, 3-5 August 2009, Beijing, China

Treetrong, J., Sinha, J., Gu, F. and Ball, A. (2009) ‘Bispectrum of stator phase current for fault detection of induction motorISA Transactions , 48 (3), pp. 378-382. ISSN 0019-0578

Tesfa, B., Mishra, R., Gu, F. and Ball, A. (2009) ‘Transient process modeling for condition monitoring of compression ignition (CI) engine’. In: Proceedings of the 12th EAEC European Automotive Congress 2009. : European Automotive Congress. . ISBN 9788096924387

Gu, F., Naid, A., Hu, N., Shao, Y., Mishra, R., Stubbs, C. and Ball, A. (2009) ‘Electrical Motor Current Signal Analysis using Modified Bispectrum for Fault Diagnosis of Reciprocating Compressors’. In: Proceedings of COMADEM 2009. : Condition Monitoring and Diagnostic Engineering Management (COMADEM). . ISBN 9788493206468

Mishra, R., Gu, F., Fazenda, B., Stubbs, C. and Ball, A. (2009) ‘Measurement and Characterisation of Faults in the Intake System of a Turbocharged Engine Using a Directional Acoustic Probe’. In: Proceedings of COMADEM 2009. : Condition Monitoring and Diagnostic Engineering Management (COMADEM). . ISBN 9788493206468

Zhang, H., Shi, J., Gu, F., Mishra, R. and Ball, A. (2009) ‘Model-based Fault Detection for a Turbocharger’. In: Proceedings of COMADEM 2009. : Condition Monitoring and Diagnostic Engineering Management (COMADEM). . ISBN 9788493206468

Guan, L., Gu, F., Shao, Y., Mishra, R. and Ball, A. (2009) ‘Empirical Mode Decomposition Based Method for Fault Diagnosis in a Helical Gearbox’. In: Proceedings of COMADEM 2009. : Condition Monitoring and Diagnostic Engineering Management (COMADEM). . ISBN 9788493206468

Duan, W., Gu, F., Dup�re, I., Zhong, S. and Ball, A. (2009) ‘The Effects of Blockage on the Propagation of Acoustic Waves in the Liquid-Shell Coupled SystemKey Engineering Materials , 413-41, pp. 327-333. ISSN 1013-9826

Al-Arbi, S., Gu, F., Guan, L., Ball, A. and Naid, A. (2009) ‘Gearbox Fault Diagnosis based on Vibration Signals Measured RemotelyKey Engineering Materials , 413-41, pp. 175-180. ISSN 1013-9826

Tesfa, B., Mishra, R., Gu, F. and Ball, A. (2009) ‘Condition Monitoring of CI engine running on Biodiesel using Transient ProcessKey Engineering Materials , 413-14, pp. 495-503. ISSN 1013-9826

Naid, A., Gu, F., Shao, Y., Al-Arbi, S. and Ball, A. (2009) ‘Bispectrum Analysis of Motor Current Signals for Fault Diagnosis of Reciprocating CompressorsKey Engineering Materials , 413-41, pp. 505-511. ISSN 1013-9826

Fan, Y., Gu, F. and Ball, A. (2009) ‘Acoustic Emission Monitoring of Mechanical Seals Using MUSIC Algorithm based on Higher Order StatisticsKey Engineering Materials , 413-41, pp. 811-816. ISSN 1013-9826

Charles, P., Sinha, J., Gu, F., Lidstone, L. and Ball, A. (2009) ‘Detecting the crankshaft torsional vibration of diesel engines for combustion related diagnosisJournal of Sound and Vibration , 321 (3-5), pp. 1171-1185. ISSN 0022-460X

Tesfa, B., Mishra, R., Gu, F. and Fieldhouse, J. (2009) ‘Investigation Of Transient Characteristics For Performance Improvement And Health Monitoring For a CI Engine Running Biodiesel’. In: University of Huddersfield Research Festival, 23rd March - 2nd April 2009, University of Huddersfield

Shi, J., Gu, F., Lennox, B. and Ball, A. (2009) ‘A Grey-box Modelling and Its Application in Model-based Fault DetectionInternational Journal of COMADEM , 12 (1), pp. 21-30. ISSN 1363-7681

2008

Fazenda, B., Gu, F., Ball, A. and Gilkes, O. (2008) ‘Acoustic diagnosis of driving belt physical condition in enclosures’. In: INTER-NOISE 2008, the 37th International Congress and Exposition on Noise Control Engineering, 26-29 October 2008, Shanghai, China

Jang, J., Gu, F., Gennish, R., Moore, J., Harris, G. and Ball, A. (2008) ‘Monitoring of Diesel Engine Combustions Based on the Acoustic Source Characterisation of the Exhaust SystemMechanical Systems and Signal Processing , 22 (6), pp. 1465-1480. ISSN 08883270

Abdusslam, S., Ball, A. and Gu, F. (2008) ‘Diagnosis and Prognosis of Machinery Health based on Advanced Intelligent Computations’. In: University of Huddersfield Research Festival 2008, 25 Feb-13 March 2008, Huddersfield

Elhaj, M., Gu, F., Ball, A., Albarbar, A., Al-Qattan, M. and Naid, A. (2008) ‘Numerical Simulation and Experimental Study of a Two Stage Reciprocating Compressor for Condition MonitoringMechanical Systems and Signal Processing , 22 (2), pp. 374-389. ISSN 08883270

Jiang, X., Gu, F. and Ball, A. (2008) ‘Automotive Diesel Engine Performance and Condition Monitoring using Downpipe Acoustic Waveform Analysis’. In: Inaugural Automotive Researchers' Conference, 8-9 January 2008, University of Huddersfield

Shi, J., Legate, I., Gu, F., Fieldhouse, J. and Ball, A. (2008) ‘Model-based fault prediction of ABS system with vehicle stationary.’. In: Proceedings of the third world congress on engineering asset management and intelligent maintenance systems conference. : Springer. .

2007

Shi, J., Elshanti, A., Gu, F. and Ball, A. (2007) ‘A Desk-top tutorial Demonstration of Model-based Fault Detection and DiagnosisInternational Journal of COMADEM , 10 (4), pp. 23-31. ISSN 1363-7681

Elshanti, A., Shi, J., Badri, A., Gu, F. and Ball, A. (2007) ‘Model-based Fault Detection and Diagnosis of the Anti-lock Braking System’. In: Second World Congress of Asset Management and the Fourth International Conference on Condition Monitoring (WCEAM), June 2007, Harrogate, UK , pp. 584-593

Shi, J., Higson, A., Kidd, M., Gu, F. and Ball, A. (2007) ‘Fault Signal Extraction Using Deviation Energy in Frequency Domain’. In: Second World Congress on Engineering Asset Management and the Fourth International Conference on Condition Monitoring, 11-14 June 2007, Harrogate, UK , pp. 1769-1778

Lidstone, L., Gu, F. and Ball, A. (2007) ‘An Experimental Study of NOx Emissions for the Development of an Emission Analysis Tool’. In: SAE 2007 Fuels and emissions conference proceedings. Washington D C, U.S.A.: SAE. .

Shi, J., Gu, F., Goulding, P. and Ball, A. (2007) ‘Integration of multiple platforms for real-time remote model-based condition monitoringComputers in Industry , 58 (6), pp. 531-538. ISSN 01663615

2006

Gu, F., Yesilyurt, I., Li, Y., Harris, G. and Ball, A. (2006) ‘An Investigation of the Effects of Measurement Noise in the Use of Instantaneous Angular Speed for Machine DiagnosisMechanical Systems and Signal Processing , 20 (6), pp. 1444-1460. ISSN 08883270

Jiang, J., Gennish, R., Gu, F., Ball, A., Jiao, F., Tao, T., Li, X. and Liu, K. (2006) ‘An Investigation of acoustic measurements in the exhaust system for diesel engine combustion monitoring.’. In: Structure health monitoring conference, 5-7 July 2006, Spain

Shi, Z., Higson, A., Zheng, L., Gu, F. and Ball, A. (2006) ‘Automatic Fault Detection Using a Model-Based Approach in the Frequency Domain’. In: ASME 8th Biennial Conference on Engineering Systems Design and Analysis, 4-7 July 2006, Torino, Italy , pp. 849-855

Fan, Y., Shi, Z., Harris, G., Gu, F. and Ball, A. (2006) ‘Monitoring the Lubrication Condition of Rolling Element Bearings Using the Acoustic Emission Technique’. In: ASME 8th Biennial Conference on Engineering Systems Design and Analysis, 4-7 July 2006, Torino, Italy , pp. 843-848

Gennish, R., Jiang, J., Albarbar, A., Harris, G., Gu, F. and Ball, A. (2006) ‘Diesel Engine Combustion Monitoring Based on Acoustic Measurement of Exhaust Systems’. In: ASME 8th Biennial Conference on Engineering Systems Design and Analysis, 4-7 July 2006, Torino, Italy , pp. 567-574

Gu, F., Jiang, J., Ball, A., Gennish, R. and Liu, K. (2006) ‘An Experimental Study of Acoustic Impedance Measurement for Engine Condition Monitoring’. In: Spring Conference Futures in Acoustics, 3-4 April 2006, Southampton, UK

Jiang, J., Liu, K., Gu, F., Yin, Y. and Ball, A. (2006) ‘An Investigation Into the Control of the Combustion Instability Using Acoustic Resonator for a Jet Engine’. In: Dynamic Systems and Control, Parts A and B: Proceedings of the ASME 2006 International Mechanical Engineering Congress and Exposition. : American Society of Mechanical Engineers (ASME). pp. 1531-1537. ISBN 0-7918-4768-3

Sasi, A., Gu, F., Li, Y. and Ball, A. (2006) ‘A validated model for the prediction of rotor bar failure in squirrel-cage motors using instantaneous angular speedMechanical Systems and Signal Processing , 20 (7), pp. 1572-1589. ISSN 08883270

2005

Shi, Z., Gu, F., Lennox, B. and Ball, A. (2005) ‘The development of an adaptive threshold for model-based fault detection of a nonlinear electro-hydraulic systemControl Engineering Practice , 13 (11), pp. 1357-1367. ISSN 0967-0661

Shi, J., Gu, F., Lennox, B. and Ball, A. (2005) ‘The development of an adaptive threshold for model-based fault detection of a nonlinear electro-hydraulic systemControl Engineering Practice , 13 (11), pp. 1357-1367. ISSN 0967-0661

Li, Y., Gu, F., Harris, G., Ball, A., Bennett, N. and Travis, K. (2005) ‘The measurement of instantaneous angular speedMechanical Systems and Signal Processing , 19 (4), pp. 786-805. ISSN 0888-3270

Li, Y., Gu, F., Harris, G., Ball, A., Bennett, N. and Travis, K. (2005) ‘The measurement of instantaneous angular speedMechanical Systems and Signal Processing , 19 (4), pp. 786-805. ISSN 0888-3270

2004

Alshandoli, A., Gu, F. and Ball, A. (2004) ‘Detection of Induction Motors Faults Using Instantaneous Phase Variation’. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis, 19-22 July 2004, Manchester , pp. 715-721

Shi, Z., Fan, Y., Gu, F., Ali, A. and Ball, A. (2004) ‘Neural Network Modelling Applied for Model-Based Fault Detection’. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis, 19-22 July 2004, Manchester , pp. 149-155

Fan, Y., Gu, F. and Ball, A. (2004) ‘A Review of the Condition Monitoring of Mechanical Seals’. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis, 19-22 July 2004, Manchester , pp. 179-184

Al-Hashmi, S., Gu, F., Li, Y., Ball, A., Fen, T. and Lui, K. (2004) ‘Cavitation Detection of a Centrifugal Pump Using Instantanous Angular Speed’. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis, 19-22 July 2004, Manchester , pp. 185-190

Shi, Z., Gu, F., Pietruszkiewicz, R. and Ball, A. (2004) ‘Remote Model-Based Condition Monitoring Applied to a Mechatronic Control System’. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis, 19-22 July 2004, Manchester , pp. 157-162

El-Shtewi, H., Li, Y., Gu, F. and Ball, A. (2004) ‘The Need for a Condition Monitoring Database Management System’. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis, 19-22 July 2004, Manchester , pp. 139-148

Albarbar, A., Gennish, R., Gu, F. and Ball, A. (2004) ‘Lubricating Oil Condition Monitoring Using Vibration and Air-Borne Acoustic Measurements’. In: ASME 7th Biennial Conference on Engineering Systems Design and Analysis, 19-22 July 2004, Manchester , pp. 205-209

Sasi, A., Gu, F., Payne, B. and Ball, A. (2004) ‘Instantaneous angular speed monitoring of electric motorsJournal of Quality in Maintenance Engineering , 10 (2), pp. 123-135. ISSN 1355-2511

Berry, E., Kukla, P., Gu, F. and Ball, A. (2004) ‘Diesel engine pollutant prediction and remote vehicle monitoring Part I: The prediction of diesel engine smoke emission using neural networksInternational Journal of COMADEM , 7 (4). ISSN 1363-7681

2003

Ball, A., Gu, F. and Yesilyurt, I. (2003) ‘Gear tooth stiffness reduction measurement using modal analysis and its use in wear fault severity assessment of spur gearsNDT & E International , 36 (5), pp. 357-372. ISSN 0963-8695

Payne, B., Gu, F., Webber, C. and Ball, A. (2003) ‘Componential coding in the condition monitoring of electrical machines Part 2: application to a conventional machine and a novel machineProceedings of the Institute of Mechanical Engineering Part C, Journal of Mechanical Engineering Science , 217 (8), pp. 901-915. ISSN 0954-4062

Webber, C., Payne, B., Gu, F. and Ball, A. (2003) ‘Componential coding in the condition monitoring of electrical machines Part 1: principles and illustrations using simulated typical faultsProceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science , 217 (8), pp. 883-899. ISSN 09544062

Wright, J., Kukla, P., Ball, A., Gu, F. and Bann, J. (2003) ‘A Novel Electrostatic Method of Ultrafine PM Control Suitable for Low Exhaust Temperature ApplicationsSAE Technical Papers . ISSN 0148-7191

2002

Li, W., Parkin, R., Coy, J. and Gu, F. (2002) ‘Acoustic based condition monitoring of a diesel engine using self-organising map networksApplied acoustics , 63 (7), pp. 699-711. ISSN 0003-682X

Ball, A., Gu, F. and Liu, S. (2002) ‘The on-line detection of engine misfire at low speed using multiple feature fusion with fuzzy pattern recognitionProceedings of the Institution of Mechanical Engineers, Part D: Journal of Automobile Engineering , 216 (5), pp. 391-402. ISSN 0954-4070

Liu, S., Gu, F. and Ball, A. (2002) ‘The on-line detection of engine misfire at low speed using multiple feature fusion with fuzzy pattern recognitionProceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering , 216 (5), pp. 391-402. ISSN 0954-4070

2001

Li, W., Gu, F., Ball, A., Leung, A. and Phipps, C. (2001) ‘A study of the noise from diesel engines using the independent component analysis.Mechanical Systems and Signal Processing , 15 (6), pp. 1165-1184. ISSN 0888-3270

Sasi, A., Payne, B., Gu, F. and Ball, A. (2001) ‘The Exploitation of Instantaneous Angular Spped for Condition Monitoring of Electric Motors’. In: Proceedings of the 14th International Congress on Condition Monitoring and Diagnostic Engineering Management, 4-6 September 2001, Manchester , pp. 311-318

2000

Gu, F., Ball, A. and Li, W. (2000) ‘The Condition Monitoring of Diesel Engines Using Acoustic Measurements-Part 1: Acoustic Characteristics of the Engine and Representation of the Acoustic SignalsSAE Technical Papers . ISSN 0148-7191

Gu, F., Ball, A. and Li, W. (2000) ‘The Condition Monitoring of Diesel Engines Using Acoustic Measurements-Part 2: Fault Detection and DiagnosisSAE Technical Papers . ISSN 0148-7191

1999

Gu, F., Jacob, P. and Ball, A. (1999) ‘Non-parametric models in the monitoring of engine performance and condition: Part 2: non-intrusive estimation of diesel engine cylinder pressure and its use in fault detectionProceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering , 213 (2), pp. 135-143. ISSN 0954-4070

Jacob, P., Gu, F. and Ball, A. (1999) ‘Non-parametric models in the monitoring of engine performance and condition: Part 1: modelling of non-linear engine processesProceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering , 213 (1), pp. 73-81. ISSN 0954-4070

1996

Gu, F. and Ball, A. (1996) ‘Automating the Diagnosis of Valve Faults in Reciprocating CompressorsMaintenance & Asset Management Journal , 11 (3), pp. 19-22. ISSN 1748-5290

Liang, B., Gu, F. and Ball, A. (1996) ‘A Preliminary Investigation of Valve Fault Diagnosis in Reciprocating CompressorsMaintenance & Asset Management Journal , 11 (2), pp. 2-8. ISSN 1748-5290

Gu, F., Ball, A. and Rao, K. (1996) ‘Diesel injector dynamic modelling and estimation of injection parameters from impact response part 2: prediction of injection parameters from monitored vibrationProceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering , 210 (44), pp. 303-312. ISSN 0954-4070

Gu, F. and Ball, A. (1996) ‘Diesel injector dynamic modelling and estimation of injection parameters from impact response Part 1: modelling and analysis of injector impactsProceedings of the Institution of Mechanical Engineers Part D Journal of Automobile Engineering , 210 (44), pp. 293-302. ISSN 0954-4070

1995

Ball, A. and Gu, F. (1995) ‘A Basis for the Vibration Monitoring of Diesel Fuel InjectorsMaintenance & Asset Management Journal , 10 (2), pp. 24-30. ISSN 1748-5290

Gu, F. and Ball, A. (1995) ‘Use of the Smoothed Pseudo-Wigner-Ville DistributionMaintenance & Asset Management Journal , 10 (2), pp. 16-23. ISSN 1748-5290

Esteem

Visiting Professor of

  • Taiyuan University of Technology
  • Hebei University of technology

Visiting Research Fellow of

  • National University of Defense Technology
  • Chongqing University
  • Acoustic Institute of Chinese Academy

Member of Editorial Advisory Board of

  • International Journal of COMADEM
  • Chinese Journal of Mechnical Engineering
  • Signal and Information Processing

Research Degree Supervision